Hydro Standard Water Softener System

Florida Water Technologies, Inc. is proud to bring to you the Hydro Standard Water Softening System to Jacksonville FL and surrounding areas. North East Florida contains the hardest water supply on the entire east coast. According to the WQA, Very Hard Water measures 7-10.5 grains per gallon. Our areas hard water readings are from the mid teens to the upper twenties!! So, we created this water softening system to be the highest quality, most efficient, most reliable and longest lasting water softener in the value brand water softener segment. Hydro Standard by Florida Water Technologies outperforms and is more reliable than whole sale water softeners systems like Fleck and Clack, and our warranties are better too. We did this by sourcing the finest components the water industry can produce, then assemble and test them by our trained professionals. Our water softeners are in stock and we usually can install it in as little as a week. Get in touch with us today at 904-551-9844!

CLICK HERE TO LOOK UP YOUR WATER HARDNESS BY ZIP CODE!

Hydro Standard Features

On Demand Metered Regeneration

On Demand Metered water softeners work on an "as needed" basis. It monitors your water usage only regenerating when necessary.

8% Crosslinked Media

We use only the finest quality 8% water softener media. Model TC 080 FG is NSF certified high capacity water softening media.

Hydro Standard is the ideal choice for people who plan on staying in their home 10 years or less.

Onboard Power Back Up

Remembers time and day, for up to one week, during a loss of power event. Additionally the system continues to work making soft water during loss of power.

Up Flow Regeneration

Up flow regeneration drives the hardness minerals up through the already depleted resin and out the drain-saving both salt and the unused portion of the resin for future use.

Built to last vs Built to fail

Let's take a moment to talk components.

Ceramics are 100% stronger than rubber O-Rings

The main job of the water softener control valve is to facilitate regeneration when the ion exchange resin is exhausted. So, every water softener has internal moving parts to make this work. 90% of water softeners in Jacksonville use a piston driven valve comprised of O-rings. This is where we differ. We use a fixed disc and a moving ceramic disc.

It's All About Friction

To facilitate regeneration the valve has to cycle to backwash, brine draw, brine fill, fast rinse then back to service. A piston driven valve with rubber O-rings uses compression against the rubber seals, this generates a lot of friction. Inevitably, the rubber seals will wear out and not be able to make a seal after about 3 to 5 years of use. Leaking water, and no soft water are symptoms of rubber seal failure. A typical piston driven valve repair will cost $200 to $400 dollars every 3 to 5 years depending on the make and model of the water softener. Ceramics on the other hand, create very little friction and can last up to 10,000 regenerations (or 2 to 3 lifetimes).

Critical Question: Does your water softener use a piston driven valve or a ceramic moving disc?

Hard Water is a Problem

Hard water causes white spots and buildup of film. When combined with soap, the minerals form soap curd or scum that makes skin dry and itchy, hair lifeless, laundry dull and builds up on fixtures. Hard water decreases the life expectancy of your faucets and fixtures and appliances by up to 40%. Hydro Standard is the most economical option to treat hard Jacksonville water.

Did You Know?

As soon as you install a new water softener system in Jacksonville FL, it will begin to reverse the buildup of scale. It will begin to soften hard water deposits, and with time will begin to flush out hard water buildup.

To learn more about the Hydro Standard water softener and our additional water softener models, call us today at (904) 551-9844.

Click Here for the Brochure

Schedule Your Free Water Consultation with One of Our Expert Team Members Today!